You got a call from a 682 number and you’re not sure whether to pick up. Or maybe you’re relocating to North Texas and trying to figure out what phone code you’ll end up with. Either way, the 682 area code has a pretty specific story, and it’s worth knowing.
The short answer: the 682 area code serves Fort Worth, Texas, and its surrounding Metroplex area, including cities like Arlington, Grapevine, and Keller. It’s a West DFW code, and if you’re doing business or living on the Fort Worth side of the Metroplex, this is your number.
Here’s the full breakdown.
Where Is the 682 Area Code Located?
Area code 682 is located in Texas. It covers 28 cities, including Dallas, Fort Worth, Arlington, Irving, and Mansfield. It also covers 7 counties, including Tarrant County, Johnson County, Parker County, Denton County, and Hood County.
Area code 682 serves the Fort Worth, Texas area, including the counties of Denton, Hood, Johnson, Parker, Tarrant, and Wise.
The geographic heart of 682 territory is Fort Worth, which is very much its own city with its own identity. Fort Worth locals are quick to point out they are not Dallas. The two cities are twins in the DFW label but carry distinct personalities: Dallas leans corporate and glitzy, while Fort Worth holds onto its ranching roots, stockyards, and Cowtown pride.
Cities Covered by the 682 Area Code
Some cities covered by area code 682 are Arlington, Bedford, Benbrook, Burleson, Cleburne, Euless, Fort Worth, Grapevine, Haltom City, Hurst, Keller, Mansfield, North Richland Hills, Southlake, and Watauga.
That’s a lot of the western Metroplex in one code. If you’re calling someone in Fort Worth proper or any of those suburbs, a 682 prefix is totally normal and expected.
The History of the 682 Area Code
Area code 682 was put into service on October 7, 2000, and was the 284th area code in service. It was one of 14 area codes introduced in 2000. It was the 21st area code in the state of Texas. It was created to relieve the pressure on the 817 area code as the numbers in 817 were being exhausted.
Area code 817 was created in 1953 mostly from area code 915, one of the original area codes of 1947. Area code 682 was added to the numbering plan area in 2000 to form an overlay plan.
So 682 didn’t replace 817. It sits on top of it. Both codes serve the same geographic footprint, which is why you might see Fort Worth numbers with either prefix. The Public Utility Commission of Texas introduced the overlay to ensure continuous telephone service without requiring residents to change their existing numbers.
It was a clean solution to a growth problem. North Texas was expanding fast, people were getting more phones and fax lines, and 817 was running dry. Rather than force everyone to change numbers, regulators just layered a new code over the top. Ten-digit dialing became mandatory in the region as a result, meaning you dial the full area code even for local calls.
An October 2023 NPA exhaust analysis estimates that a third area code will not be required in the western Metroplex until about 2038. So the number supply is holding up fine for now.
682 Texas Area Code: The Region It Represents
The 682 area code covers territory that is genuinely one of the most dynamic economic regions in the United States right now.
Fort Worth officially surpassed the 1 million resident mark, making it the 12th-largest city in the U.S., overtaking Austin. The region is anchored by the city of Fort Worth, which achieved a major milestone with an estimated population of 1,008,106 as of July 1, 2024, confirming its status as one of the largest and fastest-growing cities in the United States, having grown 3.1% in the past year.
As of 2025, Dallas–Fort Worth remains the fourth-largest metro area in the United States, with a population of 8,477,157. Over the past year alone, the Metroplex added 123,557 residents, or about 339 people per day.
That’s not a regional economy stagnating. That’s one of the most active growth stories in American urban history. The Dallas and Fort Worth metro divisions together are home to 21 Fortune 500 companies on the 2025 list. Major players in the Fort Worth area include Lockheed Martin and American Airlines, both of which anchor aerospace, defense, and logistics industries on that side of the Metroplex.
Fort Worth anchors aviation and defense industries, exemplified by Lockheed Martin and American Airlines. If you’re getting a 682 phone call from someone in hiring, finance, aviation, logistics, or real estate, that number represents a serious market.
How to Dial a 682 Number
Calling a 682 Texas area code number is straightforward, but there are a couple of nuances worth knowing:
From within the US: Dial 1-682-XXX-XXXX. Even if you’re calling locally within the 682 coverage area, ten-digit dialing is required because of the overlay system with 817.
From outside the US: Dial your country’s international exit code, followed by +1-682-XXX-XXXX.
The 682 area code follows the Central Time Zone (CT). It observes both Central Standard Time (CST) at UTC-6 during non-daylight saving months, and Central Daylight Time (CDT) at UTC-5 during daylight saving months.
That matters if you’re calling someone in 682 territory from the East or West Coast. Fort Worth is one hour behind New York and two hours ahead of Los Angeles.
682 Area Code Scam Calls: What You Need to Know
Getting an unexpected 682 call and feeling unsure about it? You’re not paranoid. Scam callers do target this prefix, but there’s an important distinction to make first.
Area code 682 is not a scam. It’s a legitimate telephone area code serving millions of legitimate residents and businesses in Texas, United States. The issue is spoofing, not the area code itself.
Scammers frequently spoof Texas phone numbers to trick you into answering. You’re likely experiencing “Neighbor Spoofing,” where scammers fake their caller ID to display local or familiar numbers. If you live in or near Texas, or have a 682 phone number yourself, scammers know you’re more likely to answer what appears to be a local call.
Most Common 682 Scam Types
The top five most frequently reported types of spam calls from area code 682 are Health Insurance calls at 11.29% of complaints, followed by Medicare/Medicaid calls at 7.53%, Solar Panels calls at 5.38%, Mortgage Loans at 5.38%, and Auto Warranty calls at 5.91%.
Fort Worth’s 682 area code is also heavily used for Social Security arrest threats and fake process server calls. Scammers say the police are on their way to arrest you unless you pay a fine immediately.
The Social Security scam deserves specific mention because it’s alarmingly convincing. A recorded message claims to be from the “Department of Social Security Administration” and states that legal enforcement action has been filed against your Social Security number for fraudulent activity. The message threatens that a warrant will be issued for your arrest and urges you to call back immediately to avoid legal proceedings. The real Social Security Administration contacts people by mail and will never threaten arrest over the phone.
How to Protect Yourself
A few practical rules that apply to 682 calls and any unfamiliar number:
Don’t call back an unrecognized number that left a vague or alarming voicemail. Calling back can confirm your number is active and invite more spam.
Never share personal information in response to an unsolicited call, including your Social Security number, bank details, or Medicare ID.
Use caller-ID apps or your phone’s built-in spam filter. Report suspicious texts or calls to the FTC at ReportFraud.ftc.gov or your carrier.
Blocking the entire area code is not recommended because it would also prevent friends, family, doctors, and legitimate businesses from reaching you. Instead, use selective call blocking through your carrier or a third-party app like Hiya or Nomorobo.
[Internal Link: RushGuides article on How to Stop Spam Calls on iPhone and Android]
Getting a 682 Phone Number for Business
If you run a business serving the Fort Worth area, a 682 number makes sense. Local numbers build trust with customers who prefer dealing with someone they perceive as nearby. Local phone numbers in area code 682 can also help businesses respond more quickly to customer inquiries and issues, and can increase visibility and reach.
You can get a 682 number through most major US carriers, VoIP providers like Google Voice or RingCentral, or business phone platforms. Availability of specific prefixes within the 682 code varies by provider, and pricing depends on the plan you choose. It’s worth comparing a few options before committing.
FAQ: 682 Area Code
What state is the 682 area code? Texas. Specifically the western Dallas-Fort Worth Metroplex, anchored by Fort Worth.
Is 682 a Dallas area code? Not exactly. Dallas itself is primarily covered by 214, 469, and 972. The 682 area code covers Fort Worth and western Metroplex suburbs. Some larger population estimates associated with 682 include Dallas metro population figures because the DFW Metroplex is counted together in certain databases.
What is the overlay for 682? 817 is the original code that 682 overlays. Both serve the same Fort Worth-area geography.
Is 682 a toll-free number? No. It’s a standard geographic area code in North Texas.
When was the 682 area code created? October 7, 2000.
Do I need to dial 10 digits for local 682 calls? Yes. Because 682 and 817 both serve the same area, ten-digit dialing is required for all local calls within that region.
The 682 area code is a genuine piece of one of America’s fastest-growing regions. If that number shows up on your phone, it’s most likely someone from the Fort Worth side of DFW, whether that’s a local business, a contractor, a school, or a friend. Know what it covers, stay alert to spoofing tactics, and you’re good.
